Quick Installation Guide
!
5
•
LED BEHAVIOR (Cont.)
E31U2V1 Quick Installation Guide
LED
COLOR
DESCRIPTION
Battery
(NOTE:
Battery is
optional)
Status Light
BLUE /
RED
• Battery at 21% (of usable charge) or Higher: On Blue
• Battery at 20% (of usable charge) or Lower: On Red
• Battery at 10% (of usable charge) or Lower: Flashing between On Red and Off
• No Battery Installed: Off
• Battery Charging: Pulsing between On Blue and Off
Illuminated
Text
WHITE
• Battery Installed: On White
Reset
Button Icon
Light
WHITE
• Device is in a State that Suggests a Power Cycle: On White
• Device is NOT in a State that Suggests a Power Cycle: Off
Ring
RED
• Device is waiting to be Power Cycled: Pulsing between On Red and Off
• Device is NOT in a State that Suggests a Power Cycle: Off
Illuminated
Text
WHITE
• Device is in a State that Suggests a Power Cycle, or is waiting to be Power Cycled: On
White
Note: When the device is in a state that suggests a power cycle (the button icon and the surrounding ring are lit),
a factory reset cannot be performed. The user must power cycle the device, then perform a factory reset.
Ethernet
Status
Lights
GREEN /
ORANGE
• An Ethernet Device is Connected at 100 Mbps Speeds: On Green
• An Ethernet Device is Connected at 1000 Mbps Speeds (Gigabit Ethernet): On
Orange
• An Ethernet Device is Connected at 10 Mbps Speeds: Off
• Data is Being Passed Between the E31U2V1 and the Connected Device: Flashing
Green or Orange