Manual

ManualsBrandsUberti ManualsFirearms1876 rifle

8 1

1876 Model Rifle

Via Artigiani, 1 - Gardone V.T (Brescia) - ITALY

Instruction Manual

BEFORE REMOVING THE FIREARM FROM THIS PACKAGE,

READ & UNDERSTAND THE PRECAUTIONS IN

THE INSTRUCTIONS MANUAL

SPECIAL SAFETY INSTRUCTIONS

1) Uberti lever action rifles should never be carried with a cartridge in the chamber.

2) Carrying this style of rifle with a cartridge. in the chamber can result in an acci-

dental discharge if the firearm is accidentally dropped or if the hammer is struck.

3) The lever locking mechanism is designed to prevent an accidental discharge.

However, no mechanical device is foolproof and, accordingly, these procedures

must be followed.

4) Due to the fact that in a tubular magazine rifle the cartridges are stacked one

behind the other, only factory ammunition should be used.

5) We recommend against using old ammunition in these rifles as primers, powder

and brass cartridge cases can deteriorate and cause damage to the rifle or injury to

the shooter or others.

6) Uberti assumes no liability for incidents occurring through the use of reloaded

ammunitions.

Use ONLY COMMERCIALLY loaded cartridges that have been loaded in accor-

dance with SAAMI-C.I.R standards.

N. Code No. Qty. Description N. Code No. Qty. Description

1 2500001 1 Frame Assembly 106 0200106 2 Link Pin

2 2500002 1 Hammer Assembly 107 0200107 2 Lever Pin

3 2500003 1 Barrel 28” Cal.45-60 108 0081030 1 Extractor Pin

7 2500007 1 Carrier Block 111 0240111 1 Safety Spring Pin

15 0202015 1 Sight 112 0200112 1 Stirrup Pin

19 0240019 1 Trigger Spring 113 2500113 1 Magazine Follower

20 2500020 1 Main Spring 114 2500114 1 Magazine Tube Plug

53 0240053 1 Main Spring Adj. Screw 115 0200115 1 Hammer Stirrup

55 0242055 1 Rear Assembly 118 2500118 1 Magazine Tube

57 2500057G 1 Rough Butt Stock 123 2500123 1 Side Plate Screw

57 2500057 1 Polished Butt Stock & Plate 124 0200124 2 Lever Spring Screw

58 2500058G 1 Rough Butt Plate 127 2500127 1 Ladle

61 0242061 1 Rear Sight 128 0240128 1 Ladle Screw

62 0200062 3 Butt Plate Screw 145 0400145 1 Peep Sight Plug Screw

63 0240063 1 Tang Screw 216 2500216 1 Forend Protection

67 2500067 1 Firing Pin Extension 217 0880217 1 Butt Plate Gate

68 250006BG 1 Rough Forend 218 2500218 1 Protection Running

68 2500068 1 Polished Forend 224 0240224 1 Protection Running Guide

73 2500073 1 Right Side Plate 225 2500225 1 Forend Protection Bearing

74 2500074 1 Left Side Plate 227 0240227 2 Rear Base Screw

79 2500079 1 Extractor 230 0870230 1 Gate Pin

83 2500083 1 Right Rear Link 231 0880231 1 Butt Plate Gate Spring

84 2500084 1 Left Rear Link 232 0880232 1 Butt Plate Gate Spring Screw

86 2600086 2 Front Link 233 0240233 1 Protection Running Screw

87 0240087 1 Trigger (Lower) 234 4510095 1 Protection Running Spring

88 0240088 1 Trigger (Upper) 238 0240238 1 Lever Hook Pin

89 2500089 1 Lever 240 0240240 1 Trigger & Lever Screw

90 2500090 1 Litter Arm 271 2500271 1 Firing Pin Extension Stop

91 2500091 1 Safety Bar 275 2500275 1 Magazine Tube Bearing

92 2500092 1 Right Lever Spring 281 0202281 1 Magazine Tub e Bearing Pin

93 2500093 1 Left Lever Spring 283 2500283 2 Forend Protection Screw

94 0240094 1 Safety Spring 284 0240284 1 Protection Running Sphere

95 0070016 1 Firing Pin Spring 542 0240542 1 Lever Hook

96 2500096 1 Magazine Spring

97 2500097 1 Breech Block ALTERNATIVES

98 2500098 1 Firing Pin

99 2500099 1 Trigger Pin 3 2501003 1 Barrel 28” Cal.45-75

101 2500101 1 Lever Screw 3 2502003 1 Barrel 28” Cal.40-60

105 0200105 2 Rear Link Pin 3 2503bo3 1 Barrel 28” Cal.50-95

Summary of content (4 pages)

PAGE 1
N. 1 2 3 7 15 19 20 53 55 57 57 58 61 62 63 67 68 68 73 74 79 83 84 86 87 88 89 90 91 92 93 94 95 96 97 98 99 101 105 Code No. 2500001 2500002 2500003 2500007 0202015 0240019 2500020 0240053 0242055 2500057G 2500057 2500058G 0242061 0200062 0240063 2500067 250006BG 2500068 2500073 2500074 2500079 2500083 2500084 2600086 0240087 0240088 2500089 2500090 2500091 2500092 2500093 0240094 0070016 2500096 2500097 2500098 2500099 2500101 0200105 Qty.
PAGE 2
TO LOAD THE FIREARM (1) Turn the lever locking latch to the release position. Releasing the latch should allow the lever to go down approximately1/2”. Do not push the lever forward. (Photos 1 A-1 B). AMMUNITION AMMUNITION WARNING: Since your gun has been designed for specific caliber ammunition, use only commercially manufactured ammunition which pressure cannot be higher than the ones stated by SAAMI or C.I.P. standards.
PAGE 3
• Make sure your gun is not loaded before cleaning, storing, traveling, laying it down, or handing it to another person. • STORE YOUR FIREARM SO THAT CHILDREN CANNOT GAIN ACCESS TO IT. It is your responsibility to insure that children under the age of 18 or other unauthorized persons do not gain access to your firearm. To reduce the risk of accidents involving children, unload your firearm, lock it and store the ammunition in a separate locked location.
PAGE 4
SAFETY MANUAL This Manual Should Always Accompany this Firearm and Be Transferred With It Upon Change of Ownership SAFETY INSTRUCTIONS Whether you are an experienced safe shooter and are familiar with these safety instruction procedures, or have some or no familiarity with handling a gun, it is imperative that you read carefully and thoroughly this entire instruction manual and follow the safety instructions to ensure you are familiar with the proper and safe use of this firearm to prevent personal injury,