User Manual 1.Printer Specification Text Format Item Description Tape Widths and the 1 ine for int li : number of print lines 12mm: 4 line Max. Print Width 7.
.Initial Settings 2.1 Turn your machine on Supply power by using the AC adapter or six AAA batteries, and then press [Power key]. Note: {1) The machine automatically turns off if no keys are pressed within five minutes. (2) To cancel any operation, press [BS(Backspace) key]. 2.2 Select label width and type a. Select label width Putin a cassette and select label width while using the machine forth first time. Use the navigation key to select the label width.
. Basic Usage 3.1 Switching Upper Case/Lower Case Press = to switch to upper case or lower case. Ala a PADDED (a) Upper case (Upper case letters displayed.) Lower case (Lower case letters displayed.) LA THe 3.2 Entering Accented Characters (1) Press an alpha character, and then press {3 [Accented characters key]. [ala a The accent variations for that alpha character are displayed.
3. Basic Usage 3.3 Entering Multi-Lines of text To make multi-line text, do one of the followings: (1) Enter the text and then press [Enter key] to go to the next line. {2) Move the cursor to where the next line starts and press [Enter key]. Note: {1} Use 12mm wide tape for four-line text; Use 9mm and 12mm wide tape for three-line text. (2) Do not press [Enter key] after the 4th line when using 12mm wide tape to avoid the “Timeline” error message.
3. Basic Usage Note: {1) After the labels printed, cut along the printed dots with scissors. This will ensure that the label length matches the print setting. (2) Ifa specific label length has been selected, also appear son the LCD 3.6 Printing Labels a.Feeding (Tape Feed) 25mm each time for tape feeding. b. Mirror Mirror ON when using Non-Laminated tape. {1) Mirror ON: {2) Mirror OFF: Mirror : General c.Setting Margins Margin is for leaving equal margins on both sides of the text.
3. Basic Usage Note: (1) After setting [Half] and [Narrow] the display shows the label length from the printed dots to the end of the label. LCD display Label image [Full] ABC ner 67 mgr + [Half] [Narrow] (2) In order to save the tape, set the margin to [Narrow] for multiple copies. (3) To avoid damage to the tape cassette, do not pull the tape. d.Printing single copies {1} If you need only 1 copy of the label, press [print key].
3. Basic Usage 3.7 Saving Label Files Save up to 15 label files and recall them for printing at a later date. Maximum of 80 characters can be saved per file. A total of 1200 characters can be saved in memory. To edit and overwrite the stored label file sis allowed. a. Save b. Open ba a dhe Note: If you try to store a label file when there is already a label file stored to that number, a message “Overwrite?” will appear. Press [OK key] to replace the previous label file with the new one.
3. Basic Usage {1) Enter text first: CH A (2) Select the Cable Wrap template first: Lo i Cable diameter: 3mm to 90mm available Default: 6mm Note: (1) For labels attached to cables and wires, Flexible ID Tape is recommended. Use the cable flag function when the diameter of the objectiveness than 3mm. {2) To deactivate the Cable Wrap function during operation, press [E)accordingly to return the setting to standard.
3. Basic Usage {1) Enter text first: Cable diameter: 3mm to 90mm available Default: 6mm Note: {1} For labels attached to cables and wires, we recommend using Flexible ID Tape. Use the cable flag function when the diameter of the objectiveness than 3mm. {2} To deactivate the Cable Wrap function during operation, pressurize) accordingly to return the setting to standard. ¢. Face plate Labels printed with this function can be used to identify various components or panels.
3. Basic Usage d. Sequence Label Using the Sequence Label, you can serialize the printing of multiple labels with outnumber letter automatically incremented on each label. 18A | 188 18C . 18D Note: (1) Printed label will be separated by printed dots (2) This serializing function can also be used with the Cable Wrap, Cable Flag or Face plate templates to save time entering and printing a series of labels. 3.9 Bar code You can print bar codes on labels with this function.
3. Basic Usage b. Barcode Input When you need to reprint another label with the last bar code, you can enter text directly by Bar code input. Bar code @ Bar code In 4, Other functions 4.1 Underline and Frame You can select the desired frame design form the chart below. 12345 th FF 0 Unframed Note: Framescannotbe printed on 12mm tape with four lines. 4.2 Shortcut keys (1) Shift + Print key = Multiple Copies [1-9] (2) Shift + Number (0~9) = Access to special characters.
4. Other functions 4.3 Text format a. Font size Press [1H to select font size b. Style c. Width d.Vertical Press to print vertical. Press [BS(Backspace) key] to cancel e. Symbols &Punctuation. Note: (1) Press [BS{Backspace) key] to return to the previous step. (2) The symbols may be different between those on the LCD and printed. 4.4 Unit Setting With this function you can setup the length unit between inch{” )and millimeter(mm).
5. Troubleshooting 5.1 Error message by pressing [Enter key]; @6mm: An attempt was made to enter a 2nd line by pressing [Enter key]; Message Cause Solution @ If using AAA alkaline batteries: . Replace them with new ones. jy Low Battery! The batteries are weak. @ If using Ni-MG batteries: Charge them fully. Battery Dead The installed batteries must be replaced. Replace batteries with new ones. ® An invalid number was entered as the label length, cable diameter or face plate length.
5. Troubleshooting 5.2 Solutions to other problems Problems Solutions The display stays blank after turning on machine ®Check that the batteries are correctly inserted. @fiftieth batteries are weak, replace them. 3If using the power adapter, make sure the cord is connected correctly and power is turned on. When the label is printed out, the margin {space} is too large on both sides of the text See “Setting Margin” in this user maul and select [Half] or [Narrow] to have smaller margins for labels.
Product Warranty Description Product after-sales service is strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China. Services are as below: 1. The free warranty period is 1 year from the date of purchase {according to the date of the official purchase invoice). 2. Within days from the date of user's receipt, user can choose to return, replace or get free repair service.
Warranty/Maintenance Card Request | Replace | Return | Repair Name: Phone: User info Address: Date of Purchase: Purchase Method: Product info Product Order Number: Product Serial Number: Problem Description /Reasons The form below is for staff filling only: Fault conditions: Maintenance staff: Maintenance Processing situation: Repair date: e Records Repair ticket number: Date of inspection:
