Wireless Speaker & Charging Hub Model: WSP1001 Thank You For Purchasing Our Wireless Speaker & Charging Hub Please Read Carefully Before Operating This Equipment Please keep it in a safe place for future reference
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 13 ) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 7 ) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
IMPORTANT SAFETY INSTRUCTIONS 19 ) Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
LOCATION OF CONTROLS Top side view: 1 2 3 4 5 6 7 8 5. Volume Up Button 6. Source Switch Button 7. Wifi/Bluetooth Indicator 8. Power Indicator 1. Skip Previous Button 2. Play/Pause Button Press and Hold to Reset to Factory settings 3. Skip Next Button 4. Volume Down Button Front side view: 9 9 10 11 9. Speaker 10. Wireless Charging Surface 11.
LOCATION OF CONTROLS Back side view: 12 13 14 12. USB Connector Port 1 13. DC IN Jack 14. USB Connector Port 2 POWER SOURCE 1. Connect the power adaptor to the wall outlet having AC 100-240V~; 50/60Hz. 2. Insert the small plug of the power adaptor to the DC IN Jack on the back of unit. Note: To save energy, unplug the power adaptor from the wall outlet if you may not use the unit for an extended period of time.
CONNECTING THE NETWORK Attention: ~ Before connecting the wireless network, please make sure that your smart phone (not included) was connected with a Wi-Fi network. ~ While connected to the power source, your Wireless Speaker & Charging Hub will access to the network connecting mode directly with white Wi-Fi indicator flashes fast.
BLUETOOTH OPERATION After initial pairing, your Wireless Speaker & Charging Hub will stay paired unless you unpaired it manually, or erased due to a reset device. If this occurs or you find the unit is unable to connect, please repeat below steps: 1. Press and hold the Source Switch button until the bluetooth indicator on top side flashes fast. 2. Activate the bluetooth function on your bluetooth device and choose "Ubio-WSP1001", after a while, the pairing will be connected automatically.
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION No Power The adapter is not connected Connect the adapter to the unit and wall outlet Volume level in minimum position Increase the volume level by press and release the + button on the top of device repeatedly The paired/connected device is not in playback mode Play music/movie in the paired/ connected device as usual and make sure the volume level of it is in high level No Sound or Sound Weak Sound Distortion /Rattle Bluetooth Reception
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
