User's Manual

Carpo- TE00R00 User Guide
0
< Lights green when the system is powered on and
battery is fully charged.
< Lights blinking green when the system is in S3
Suspend.
< Lights orange indicates that the battery is in charging.
< Lights off when the battery is discharged or power off.
< Lights blinking red when the battery power is low
under 10%.
 Storage Access
When LED in blue light indicates that the system is
accessing the Storage Drive.
 WiFi Access
When LED turns on in blue light indicates that the WiFi
accessing is activated. When LED lights off, it indicates
that the function is disabled.
z Light Sensor
This sensor works with brightness control. When you set the
brightness control to Auto (for details, please refer 5.3.1), it will
automatically detect the light environment, and adjust the screen
brightness according to the operating environment.
z Barcode Buttons
When Scanner is scanning the Barcode, please press Barcode
Button simultaneously to enable this function.
If your system does not install this module, this button can be
programmable to execute specific application.
Navigation Buttons
The navigation buttons include up, down, right, and left arrow keys
and the Enter key in the center.