User's Manual

3
6. Maintenance & Care
The sensor housing can be wiped for dust to
prevent potential overheating, and the optical
lens may be cleaned with a damp cloth if needed
(do not use cleaning agents).
verse: either with the “hinge” in the right side
(see g. 6) or on the left side (see g. 7). This
way the sensor can be mounted to every angle.
To achieve optimal placement see g. 17 & 18.
7. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an
environmentally compatible manner. Do not
dispose of electrical and electronic equipment
as domestic waste.
EU countries only: under the current European
Directive on Waste Electrical and Electronic
Equipment and its implementation in national
law, electrical and electronic equipment no longer
suitable for use must be collected separately
and recycled in an environmentally compatible
manner.
9. Technical specication
HD WA
Sensor Size
(H x W x D)
120 × 52 × 22,5 mm
Mount Dimensions
(H x W x D)
65 × 21 × 12 mm
Sensor Connection 2.4/5 GHz WLAN
(802.11b/g/n/ac)
Wi-Fi requirements
Security: WPA2-Personal
Mode: b or b+g (2.4/5 GHz)
Group cipher: ccmp
Pairwise ciphers: ccmp
Housing color White
Housing material Plastic
IP rating IP20
Temperature range 0°C to 40°C
Light value 20 - 10000 lux
Sensor weight 72 g
Mount weight 13 g
Sensor type IoT
Technology AI optical sensor
Detection speed 1-10 fps
Optical eld of view 60° × 35° 84° × 45°
Maximum Range 10 m 7m
Application Indoor
Mounting Vertical wall
Mounting height 2 m to 3 m
Optimal mounting
height
2.10 m
Scalability 1-50 per gateway
Power input 12V/1A DC jack
5V/2A USB-C
Power adapter
(main supply)
AC 100-240V, EU plug
Power consumption 2W(peak)
Alternative power
source
PoE+ (standard 802.3at)
Certication CE approved
5. Installation & Calibration
For single sensor installation:
Make sure the UBIgateway is within Wi-Fi range
of all sensors. If distances are too great, Wi-Fi
extenders may be needed (NOTE: less applicable
if the building’s existing Wi-Fi connection is being
used).
Gateway must not be obstructed or hidden
behind metal or concrete walls, or other things
that could negatively affect the Wi-Fi signal.
Antennae must be rmly screwed onto the
Gateway and pointing directly up or directly
down.
Connect UBIgateway to internet via ethernet, and
power on the UBIcapture and the UBIgateway.
Allow 1 minute for the sensors to download
latest rmware updates and connect to the
UBIgateway.
For dual sensor installation:
Position the sensors correctly to achieve optimal
performance and room coverage (see g. 11 &
g. 13)
NOTE: In order to properly display in your BMS
or Cloud, UBIcapture must have a designated
gateway commissioned by UbiqiSense.