Desktop Security Camera
Introduction Introduction Thank you for purchasing the Ubiquiti Networks™ airCam™ Mini. This Quick Start Guide includes the warranty terms and is designed to guide you through the installation of the airCam and show you how to access the Camera Configuration Interface. The airVision™ software and User Guide are available for download at downloads.ubnt.com/airvision. The airCam Mini is equipped with an integrated microSD card writer.
airCam™ Mini Hardware Overview Front Focus Ring Reset Button Reset Microphone microSD Card Slot Ethernet Port Desktop Stand Back Camera body rotates 360˚ 2 Base pivot joint rotates 360˚
Hardware Overview Adjustable Camera Positions 30° 60° Camera can be angled to lean 60° forward or 30° backward.
airCam™ Mini LEDs Ethernet The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity. Power The Power LED will light steady orange when the airCam is connected to a power source. Note: LED operation may be disabled using the Camera Configuration Interface. Hardware Installation Your airCam Mini is pre-assembled at the factory and is Plug-and-Play ready.
Hardware Installation 2. Insert the Anchor into the hole and secure the Wall Mount Bracket with the Screw. 3. Detach the airCam Mini from the Desktop Stand.
airCam™ Mini 4. Attach the airCam Mini to the Wall Mount Bracket. microSD Installation (Optional) Insert a microSD card into the slot on the side of the airCam Mini until it locks into the slot. To remove the microSD card, push the card in to release the lock, then pull the card out.
Connecting the Power Connecting the Power 1. Connect an Ethernet cable to the Ethernet port on the airCam Mini. 2. Connect the other end of the Ethernet cable from the airCam Mini to the Ethernet port labeled POE on the PoE Adapter. 3. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter.
airCam™ Mini 4. Connect the power cord to the power port on the PoE Adapter. Connect the other end of the power cord to a power outlet. airVision Download and install the latest version of the airVision software at downloads.ubnt.com/airvision. The airVision auto management feature should automatically detect and install your new camera. • Go to the airVision interface to verify the camera is installed. It should appear on the left under Unplaced Cameras. • Drag the Camera the map.
Camera Configuration Interface Camera Configuration Interface Access the Camera Configuration Interface if you have not yet installed airVision, or plan to use the airCam as a stand‑alone camera without airVision. 1. Make sure that your host machine is connected to the same LAN as the airCam Mini. 2. The airCam Mini is set to DHCP by default.
airCam™ Mini Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Limited Warranty Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FO
airCam™ Mini Compliance FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Compliance RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
airCam™ Mini Français La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
Declaration of Conformity Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
airCam™ Mini Íslenska [Icelandic] Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í tilskipun 1999/5/EC. Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Support support.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com www.ubnt.com © 2011-2013 Ubiquiti Networks, Inc. All rights reserved.
