User Manual

Connecting Ethernet

1. Push the button and slide the port cover down to access

cableports. (The port cover cannot be completely removed.)

2. Connect the Data/PoE Ethernet cable:

a. Feed an outdoor, shielded CAT6 cable up through the

rightmost cable feed slot on the bottom of the port cover.

b. Connect the cable to the Data port.

c. Create a strain relief for the Ethernet cable by feeding a

Cable Tie through the tie slot to the side of the cable.

d. Wrap the Cable Tie around the cable and tighten.

GPS

MASTER

LINK

RESET

OVERLOAD

4X to 0.25X

REMOTE

LOCAL

MANAGEMENT DATA

AUX

ACT SPEED ACT SPEED