User Manual

Installation Overview

We recommend that you configure your paired airFiber radios

before mounting. Below is an overview of the installation with

specific details in the following instructions:

• Connect Power over Ethernet to the Data port, and

connect an Ethernet cable between your computer and the

Managementport.

• Configure the device settings in the airFiber Configuration

Interface.

• Once configuration is complete, disconnect the cables to move

the airFiber radios.

• Pre-assemble the mounting hardware.

• Install the airFiber radios at the site.

• Establish and optimize the RF link.

Note: The AF-5 and AF-5U models share the same

installation and configuration instructions.

Connecting Power over Ethernet

1. Push the button and slide the port cover down to access

cableports. (The port cover cannot be completely removed.)