User guide

7
Chapter 4: Main TabairCam
™
User Guide
Ubiquiti Networks, Inc.
Chapter 4: Main Tab
The Main tab displays airCam status/statistical information and
provides video and client monitoring links.
Status
Device Name Displays the customizable name (ID) of the
airCam. The Device Name can be modified on the System tab.
Version Displays the version of the airVision software installed.
Uptime This is the total time the airCam has been running since
last power up (reboot) or software upgrade. The time is displayed
in days, hours, minutes and seconds.
Date Displays the current system date and time. The
date and time are displayed in YEAR-MONTH-DAY
HOURS:MINUTES:SECONDS format. The system date and time is
retrieved from the Internet using NTP (Network Time Protocol).
The NTP Client is enabled by default on the Services tab. The
device doesn’t have an internal clock and the date and time
may be inaccurate if the NTP Client is disabled or the device isn’t
connected to the Internet.
MAC Address Displays the Media Access Control (MAC) address
of the airCam.
LAN Indicates the current status of the Ethernet port(s)
connection. This can indicate that a cable is not plugged into a
device and there is no active Ethernet connection. When cable is
plugged in, negotiated data rate will be displayed; possible rates
are 10Mbps or 100Mbps, or else Half duplex or Full duplex.
Monitor
Live View
Displays a live video view based on the settings configured on
the Video tab.