Setup guide

Current Status of the system bridge table
• Show Bridge Table: selection lists all the entries in the system bridge table,
while the device is operating in Bridge mode.
The list can be updated using the Reload button.
Bridge table shows to which bridge port the particular station is associated to -
in other words from which interface (ethernet or wireless ) the network device
(defined by MAC address ) is reachable to AirOS system while forwarding the
packets to that port only (thus saving a lot of redundant copies and transmits).
Ageing timer shows ageing time for each address entry (in seconds) - after
particular time out, not having seen a packet coming from a certain address,
the bridge will delete that address from the Bridge Table.
Status of the throughput on LAN interface
• Show Throughput selection continuously represents the current data traffic
on the LAN, WLAN and PPP interfaces in both graphical and numerical form.
The statistics is updated automatically and can be updated using the Reload
button.