Setup guide

Note: LAN IP Address and WLAN IP Address displays the same value - current IP
address of the virtual bridge interface, while the device is operating in Bridge mode.
Statistics Reporting
LAN interface Statistics
LAN Statistics: section displays the detailed receive and transmit statistics ( Bytes ,
Packets , Errors ) of LAN (Ethernet) interface. This statistics represents the total amount
of data and packets transfered between devices through the ethernet interface either
way.
Both unicast IP traffic (conversations between two hosts using HTTP, SMTP, SSH and
other protocols) and broadcast traffic (while addressing all hosts in a given network
range with a single destination IP address) is accounted.
As long as there is some network traffic being generated or passed through the LAN
interface, Received and Transmitted Bytes and Packets value will go on increasing.
Errors value represents the total number of transmitted and received packets for which
an error occurred.
WLAN interface Statistics
WLAN Statistics: section displays the detailed receive and transmit statistics ( Bytes ,
Packets , Errors ) of the wireless interface.
This statistics represents the total amount of unicast and broadcast IP data transfered
between devices through the wireless interface either way.
As long as there is some network traffic being generated or passed through the
' wireless interface, Received and Transmitted Bytes, Packets and Errors (if any) value
will go on increasing.
PPP interface Statistics
PPP Statistics: section displays the IP address of the PPP interface and the detailed
receive and transmit statistics ( Bytes , Packets , Errors ) of the PPP interface. PPP
statistics are available in
Router mode only, while PPPoE is enabled.