User`s guide

Logo Customization

Use this section to enable and upload your custom logo on the

LiteStation2/LiteStation5 user interface. The logo must conform to

these limitations:

 The limit of logo size is 50Kb.

 The maximum height of logo should be 70 pixels.

 Only .gif format images are accepted.

To upload your custom logo, enable logo customization and specify

the location of logo file:

Figure 18 – Custom Logo Upload

Resetting the device to factory

defaults, custom logo will be set

back to default Ubiquiti logo.

Enable Custom Logo: click to enable logo customization.

Deselecting this option the custom logo will be removed and the

default Ubiquiti logo will be set back.

Logo Target URL: specify the target URL of custom logo.

Logo File: click Browse… button to navigate to and select the logo

file or specify the full path and click the Upload button.

Change: click to change the logo on the LiteStation2/LiteStation5

user interface.

Device Maintenance

Use this section to reboot subscriber section or reset station

parameters to factory default values:

Keep in mind that reset button

will set the administrator

password back to default:

 Username – ubnt

 Password – ubnt

Figure 19 – Device Maintenance Settings

Reboot: click to reboot device in the current configuration.

Reset to Defaults: click to reset your subscriber station into factory

defaults status.