5 GHz airMAX® ac Radio Model: NS-5ACL
Introduction Thank you for purchasing the Ubiquiti Networks® NanoStation® 5AC loco. This Quick Start Guide is designed to guide you through the installation and also includes warranty terms. Package Contents NanoStation loco Wall Mount Bracket Screws (Qty. 2) Screw Anchors (Qty. 2) 5 GHz, 13 dBi airMAX® CPE Model: NS-5AC-G2 Zip Tie Gigabit PoE (24V, 0.
Hardware Overview Back View LED Panel Mounting Bracket Port Cover Release Button
LED Panel Power The Power LED will light green when the device is connected to a power source. Ethernet The LED will light steady green when an active Ethernet connection is made to the Main/LAN port and flash when there is activity. Signal In airOS®, you can modify the threshold value for the wireless signal strength LEDs on the Wireless tab under Signal LED Thresholds. Each LED will light when the wireless signal strength is equal to or greater than the LED’s threshold value.
Ports Ethernet Port Reset Button Ethernet Port 10/100/1000 Ethernet port used to connect the power and should be connected to the LAN and DHCP server. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoStation loco is powered on. Alternatively, a remote reset button is located on the bottom of the Gigabit PoE Adapter.
Hardware Installation 1. Press the Port Cover Release Button located on the back of the NanoStation loco and slide the cover off. 2. Connect an Ethernet cable to the Ethernet Port. 3. Replace the port cover.
Pole Mount 1. Position the NanoStation loco at the desired location on a pole and insert a Zip Tie into the slot of the Mounting Bracket.
2. Align the front of the NanoStation loco toward the other end of the wireless link. Then tighten the Zip Tie around the pole.
Wall Mount The included Wall Mount Bracket allows the NanoStation loco to be mounted on a wall or flat surface using the Screw Kit that came with the NanoStation loco. 1. Secure the Wall-Mount Bracket to the wall using the two Screws. Depending on the type of wall material, there are also two Screw Anchors included for added stability. 2. Attach the NanoStation loco to the wall by aligning it with the Wall-Mount Bracket and sliding it down into the slots of the bracket until it is secure. 3.
Connecting to the PoE Adapter 1. Connect the Ethernet cable from the NanoStation loco to the POE port of the PoE Adapter. 2. Connect an Ethernet cable from your LAN to the LAN port of the PoE Adapter. 3. Connect the Power Cord to the adapter’s power port. Connect the other end of the Power Cord to a power outlet. Mounting the PoE Adapter (Optional) 1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired location, and mark the two holes. 2.
Accessing airOS via Wi-Fi Verify connectivity in the airOS Configuration Interface. There are two methods: U Mobile App and Web Portal. Both are available for 15 minutes immediately after you power on the NanoStation loco. If necessary, you can power cycle the NanoStation loco to re-enable its Wi-Fi. Proceed to the section that corresponds with your preferred method: U Mobile App 1. Download the U Mobile app from the App Store (iOS) or Google Play™ (Android). 2.
5. Tap Connect on the Login screen. 6. Select your Country and tap Done.
7. Customize your settings as needed.
Web Portal 1. Connect your device’s Wi-Fi to the NanoStation loco SSID named: NS-5ACL: Note: Ensure that your Wi-Fi connection has DHCP enabled. 2. Launch a web browser and type the following URL into the address bar: http://setup.ubnt.com http://setup.ubnt.com 3. Enter ubnt in the Username and Password fields. Select your Country and Language. You must agree to the Terms of Use to use the product. Click Login. Note: The Country setting for U.S.
Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements. The Output Power field is provided to the professional installer to assist in meeting regulatory requirements.
Specifications NS-5ACL Dimensions 179 x 77.5 x 59.1 mm (7.05 x 3.05 x 2.33") Weight 0.18 kg (6.35 oz) Processor MIPS 74K Memory 128 MB Antenna Gain 13 dBi Channel Bandwidth Networking Interface LEDs 10/20/30/40/50/60/80 MHz 10/100/1000 Mbps Ethernet Port Power, Ethernet, (4) Signal Strength Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Power Supply 24V, 0.5A Gigabit PoE Supply (Included) Max. Power Consumption 8.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian CAN ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 24.1 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de toute personnes d’au moins 24.1 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Lietuviškai [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC.
www.ubnt.com ©2016-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, and NanoStation are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
