Owners manual

9
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 2: Using the UniFi Controller Software
Advanced Options
• VLAN To use a VLAN, select Use VLAN ID and enter the
VLAN ID number.
• Hide SSID Select this option if you don’t want the
wireless network name or SSID to be broadcast.
• WPA Mode (Available if WPA security is enabled.) Select
the appropriate WPA method: Both, WPA1 Only, or
WPA2 Only.
• Encryption Select the appropriate encryption method:
Auto, TKIP Only, or AES/CCMPOnly.
• User Group Assign wireless users to a specific user
group. For more information about user groups, see
“Settings > User Groups” on page 15.
• Scheduled Select Enable WLAN Schedule to restrict
wireless access to the schedule you set.
- Monday-Sunday Select the days you want to
schedule.
- Hours Use the sliders to select the start and end
times of the day’s wireless access.
• Save Click to apply changes.
• Cancel Click
CANCEL
to discard changes.
Settings > Networks
Configure the networks for each site.
Networks
Name Displays the network name.
Purpose Displays a description of this network.
Subnet Displays the IP address and prefix size.
VLAN Displays the VLAN ID, if applicable.
Actions Click a button to perform the desired action:
• Edit Click to make changes to the network
settings. Go to the Create or Edit a Network section
below.
• Create New Network Click
to add a
wireless network. Go to the Create or Edit a Network
section below.
Create or Edit a Network
• Name Enter or edit the network name.
• Purpose Select the most appropriate description:
Corporate, Guest, Remote User VPN, Site-to-Site VPN,
Voice, or VLAN Only. Then follow the instructions for
your selection:
Corporate or Guest Network
• IP/Subnet Enter the IP address and prefix size.
• VLAN (Only available when you create a network.) Enter
the VLAN ID.
• DHCP Server Enabled by default. The local DHCP server
assigns IP addresses to DHCP clients on the network.
• DHCP Range Enter the starting and ending IP
addresses of the range in the fields provided.
• Save Click to apply changes.
• Cancel Click
CANCEL
to discard changes.