Owners manual

62
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 11: UniFi Switch Details
The bottom of the window has three buttons:
• Locate Click to flash the System LED on the
Switch and the Switch’s icon on the Map tab so you can
locate it. The LED will flash until the Locate button is
clicked again. (The icon on the Map tab will flash three
times and stop.)
• Restart Click
to restart the Switch.
• Upgrade If a software upgrade is available for the
Switch, click
to install the latest UniFi firmware
on the Switch. The Status will appear as Upgrading until
the process is complete and the Switch reconnects to
the UniFi Controller software.
UniFi Switch – Details
Click Overview to display the device specifics, connection
details, and uptime.
Overview
MAC Address Displays the MAC address or unique
hardware identifier of the Switch.
Model Displays the model name of the Switch.
Version Displays the version number of the Switch’s
firmware.
IP Address Displays the IP address of the Switch.
Power Consumption Displays the amount of power used
by the Switch.
Uptime Displays the duration of time the Switch has been
running without interruption.
Uplink
Port Displays the port number.
Uplink Displays the name or MAC address of the uplink
device. You can click the name to get additional details.
Speed Displays the connection speed in Mbps.
Duplex Displays the mode, Full Duplex or Half Duplex.
Down Pkts/Bytes Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes Displays the number of packets and total
bytes uploaded by thedevice.
Activity Displays the level of activity in Bytes per second.
Downlinks
Port Displays the number of the connected port.
Device Displays the name or MAC address of the
downlink device. You can click the name to get additional
details.
Model Displays the model number of the downlink
device.
Status Displays the connection speed and duplex mode.