Owners manual

75
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
Access Point - Pending Approval
The Pending Approval state indicates that the Access Point
is in the default state and is available for adoption.
MAC Address Displays the MAC address of the AP.
Model Displays the model number.
Version Displays the version of software used on the AP.
Last Seen Displays the amount of time that has passed
since the AP was last seen.
Adopt Click Adopt to adopt the AP so you can manage it
using the UniFi Controller software.
Forget This AP
Forget Click to remove the AP from
management by the UniFi Controller software and reset it
to factory default settings.
Note: Use caution when clicking Forget. This will
restore the AP to factory default settings when it is
in a Connected state. Do not use the Forget option
when the AP is in an Isolated or Disconnected state. If
you do, the only way to make the AP accessible from
the UniFi Controller is to take it down and connect
by wire.
Move to To move the AP, select another site from the
drop-down menu.