User's Manual
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®AC
In‑Wall Wi‑Fi Access Point. This Quick Start Guide is designed
to guide you through installation and also includes
warrantyterms.
Important: UniFi Controller v5.3 is recommended for
managing the UAP‑AC‑IW and is available for download
at: download.ubnt.com/unifi
Package Contents
Cover Plate UAP‑AC‑IW Back Plate
In-Wall 802.11AC
Wi-Fi Access Point
Model: UAP-AC-IW
Wall‑Mount Screws
(Qty. 4)
Security Torx
Screws (Qty. 2)
Phillips Screws
(Qty. 2)
Quick Start
Guide
Installation Requirements
• Pre‑installed electrical wall box
• Category 5 (or above) UTP cabling approved for indoor use
• Phillips screwdriver
• T10 Security Torx bit (for Security Torx Screw option)
• UniFi Switch with PoE
Important: The UAP‑AC‑IW requires a UniFi Switch
with PoE for power. Passive PoE adapters are not
recommended.
TERMS OF USE: It is the customer’s responsibility to follow local country regulations, including
operation within legal frequency channels, output power, indoor cabling requirements, and
Dynamic Frequency Selection (DFS) requirements.