User's Manual
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®AC
In‑Wall Pro Wi‑Fi Access Point. This Quick Start Guide is
designed to guide you through installation and also includes
warrantyterms.
IMPORTANT: UniFi Controller v5.4 is recommended
for managing the UAP‑AC‑IW‑PRO and is available for
download at: www.ubnt.com/download/unifi
Package Contents
Cover Plate UAP‑AC‑IW‑PRO Back Plate Wall‑Mount Screws
(Qty. 4)
In-Wall 802.11ac Pro
Wi-Fi Access Point
Model: UAP-AC-IW-PRO
Torx Screws
(Qty. 2)
Phillips Screws
(Qty. 2)
Torx Security
Screw
Phillips Security
Screw
Quick Start
Guide
Installation Requirements
• Pre-installed electrical wall box
• Category 5 (or above) UTP cabling approved for indoor use
• Phillips and flathead screwdrivers
• T10 Security Torx bit (for Security Torx Screw option)
• UniFi Switch with PoE
IMPORTANT: The UAP‑AC‑IW‑PRO requires a UniFi
Switch with PoE for power. Passive PoE adapters are not
recommended.
TERMS OF USE: It is the customer’s responsibility to follow local country regulations, including
operation within legal frequency channels, output power, indoor cabling requirements, and
Dynamic Frequency Selection (DFS) requirements.