802.
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® 802.11AC Dual-Band Indoor/Outdoor Access Point. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Package Contents UniFi AC Mesh Screws (Qty. 2) Antennas (Qty. 2) Screw Anchors (Qty. 2) Zip Ties (Qty.2) Wall Mount Bracket Fast-Mount Adapter 802.11AC Dual-Band Indoor/Outdoor Access Point Model: UAP-AC-M Gigabit PoE (24V, 0.
Installation Requirements • Wall-mounting: Drill and 6 mm drill bit • Phillips screwdriver • Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.
Network Topology Requirements • A DHCP-enabled network (for the UniFi device to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniFi Controller v5.1.
Hardware Overview LED Status LED Port Cover Front LED Color Right Side Status Flashing White Initializing. Steady White Factory default, waiting to be integrated. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Quickly Flashing Blue Used to locate and identify a UniFi device. When the Locate feature is activated in the UniFi Controller software, the Status LED will flash blue.
Ports Ethernet Port Reset Button Ethernet The Ethernet port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by one of the following: • Gigabit PoE adapter (included) • Ubiquiti Networks UniFi Switch with PoE • 802.3af PoE compliant switch Reset The Reset button serves two functions for the UniFi AP: • Restart Press and release the Reset button quickly.
Hardware Installation The UniFi AP can be mounted on a wall, pole, or fast-mount of a Ubiquiti high-gain antenna. Perform the steps for the appropriate installation: Wall Mount To mount the UniFi AP on a wall, use the included Wall Mount Bracket, Screws, and Screw Anchors. 1. Place the Wall Mount Bracket at the desired location on the wall in the orientation shown below. 2. Ensure the level is plumb and mark the two screw holes on the wall. 3. Drill out the holes using a 6 mm drill bit. 4.
6. Attach the UniFi AP to the Wall Mount Bracket by sliding the mounting tabs into the channel slots until it locks into place.
Pole Mount To mount the UniFi AP on a pole, use the included Zip Ties: 1. Insert a Zip Tie through the slot of the mount bracket on the back of the UniFi AP.
2. Position the UniFi AP at the desired location on the pole and then fasten the Zip Tie around the pole. Fasten the second Zip Tie in the same manner.
Fast-Mount The included Fast-Mount Adapter allows the UniFi AP to be mounted on a Ubiquiti high-gain antenna equipped with a fast‑mount radio mounting bracket. 1. Attach the Fast-Mount Adapter to the fast-mount by sliding the four mounting tabs into the corresponding channel slots until it locks into place.
2. Mount the UniFi AP to the Fast-Mount Adapter.
Attach Antennas 1. Remove and discard the two black boot covers. Ensure the Rubber Gaskets remain in place.
2. Connect the Antennas to the RP-SMA connectors.
Powering the UniFi AP 1. Slide the Port Cover down to remove it. 2. Connect an Ethernet cable to the Ethernet port, and then replace the Port Cover.
Connecting to a PoE Adapter 1. Connect the Ethernet cable from the UniFi AP to the POE port of the Gigabit PoE adapter. 2. Connect an Ethernet cable from your LAN to the LAN port of the Gigabit PoE adapter. 3. Connect the Power Cord to the adapter, and then plug the Power Cord into a power outlet. Mounting the PoE Adapter (Optional) 1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired location, and mark the two holes. 2.
Connecting to a PoE Switch Connect the Ethernet cable from the UniFi AP directly to a PoE port on an 802.3af switch. PoE will automatically be enabled.
Software Installation Download and install the latest version of the UniFi Controller software at: downloads.ubnt.com/unifi Launch the software and follow the on-screen instructions. Step-by-step instructions are available in the User Guide located on our website: documentation.ubnt.com/unifi After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Username and Password that you created and click Log In.
Specifications UAP-AC-M Dimensions 353 x 46 x 34.4 mm (13.9 x 1.81 x 1.35") Weight 152 g (5.36 oz) with Antennas Networking Interface (1) 10/100/1000 Ethernet Port Buttons Power Method Power Supply Supported Voltage Range Power Save Max. Power Consumption Max. TX Power 2.4 GHz 5 GHz Throughput Speed* 2.4 GHz 5 GHz Range* Antennas Antenna Gain 2.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Alert Sign (!) Follows CE Marking Alert sign must be indicated if a restriction on use applied to the product and it must follow the CE marking. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Lietuviškai [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/KE.
