Dual-Radio 802.
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® AP. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Important: The UAP-AC-PRO-O requires the UniFi Controller v4.9.x or newer, available at: downloads.ubnt.com/unifi Package Contents UniFi AP Pro Outdoor Mounting Bracket Pole Clamps (Qty. 2) Carriage Bolts (M8x120, Qty. 4) Dual-Radio 802.11AC Pro Outdoor Access Point Model: UAP-AC-PRO-O Flange Nuts (M8, Qty.
Installation Requirements • 13 mm wrench (for pole mounting) • Cable feed must be pointed downwards when mounted. • Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.
Network Topology Requirements • A DHCP-enabled network (for the UniFi device to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniFi Controller v4.9.
Hardware Overview LED Status LED LED Color Status Flashing White Initializing. Steady White Factory default, waiting to be integrated. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Quickly Flashing Blue Used to locate and identify a UniFi device. When the Locate feature is activated in the UniFi Controller software, the Status LED will flash blue.
Ports Secondary Ethernet Port Reset Button Main Ethernet Port Secondary The Secondary port is a Gigabit Ethernet port used for bridging. Reset The Reset button serves two functions for the UniFi AP: • Restart Press and release the Reset button quickly. • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Main The Main port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server.
Hardware Installation The UAP-AC-PRO-O includes hardware for mounting on a pole or mast. Alternatively, it can be installed on a wall using additional fastening hardware. Pole Mount 1. Insert two Carriage Bolts into each Pole Clamp and attach a Flange Nut on each bolt. Note: The mounting assembly can accommodate a Ø 38 - 76 mm pole. 2. Attach one of the Pole Clamps to the pole by sliding the Carriage Bolts around the pole and into the top two slots of the Mounting Bracket.
3. Uniformly hand-tighten each Flange Nut. Ensure the Pole Clamp is evenly clamped around the pole and tighten each Flange Nut to approximately 25 N-m. 4. Repeat steps 2 and 3 for the second Pole Clamp.
5. Attach the UniFi AP to the Mounting Bracket: a. Position the UniFi AP with the Mounting Bracket aligned between the mounting tabs on the back of the UniFi AP. b. Slide the UniFi AP downward into the grooves of the Mounting Bracket until the snap pins engage and lock the UniFi AP in place.
Wall Mount To mount the UniFi AP on a wall, securely attach the Mounting Bracket to the wall using four fasteners (not included). Note: The Mounting Bracket must attach directly to a stud or other structurally stable surface. 1. Locate the stud. 2. Position the Mounting Bracket on the stud, ensuring at least two holes are centered on the stud. 3. Mark all four holes on the wall. 4. Drill pilot holes as necessary. 5. Secure the Mounting Bracket to the wall with four fasteners.
6. Attach the UniFi AP to the Mounting Bracket: a. Position the UniFi AP with the Mounting Bracket aligned between the mounting tabs on the back of the UniFi AP. b. Slide the UniFi AP downward into the grooves of the Mounting Bracket until the snap pins engage and lock the UniFi AP in place.
Connecting Ethernet 1. Press down on the center of the port cover and slide it downward to remove it.
2. Connect an Ethernet cable to the Main port. 3. Replace the port cover.
Powering the UniFi AP The UAP-AC-PRO-O features auto-sensing 802.3af PoE support and can be powered by any of the following: • Gigabit PoE Adapter (included) • Ubiquiti Networks UniFi Switch with PoE • 802.3af/802.3at PoE+ compliant switch Connecting to a PoE Switch Connect the Ethernet cable from the UniFi AP directly to a PoE port on the switch.
Connecting to a PoE Adapter 1. Connect the Ethernet cable from the UniFi AP to the POE port of the Gigabit PoE adapter. 2. Connect an Ethernet cable from your LAN to the LAN port of the Gigabit PoE adapter. 3. Connect the Power Cord to the adapter, and then plug the Power Cord into a power outlet. Mounting the PoE Adapter (Optional) 1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired location, and mark the two holes. 2.
Software Installation Download and install the latest version of the UniFi Controller software at: downloads.ubnt.com/unifi Launch the software and follow the on-screen instructions. Step-by-step instructions are available in the User Guide located on our website: documentation.ubnt.com/unifi After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface.
Specifications UAP-AC-PRO-O Dimensions Weight Networking Interface 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37") 633 g (1.40 lb) (2) 10/100/1000 Ethernet Ports Buttons Power Method Power Supply Reset 802.3af PoE 48V, 0.5A PoE Gigabit Adapter (Included) Supported Voltage Range 44VDC to 57VDC Max. Power Consumption 9W Max. TX Power 2.4 GHz 5 GHz 22 dBm 22 dBm MIMO 2.4 GHz 5 GHz Throughput Speeds* 2.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Industry Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter, except as listed for this product’s certification.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Lietuviškai [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/KE.
Online Resources Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com www.ubnt.com ©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, ToughCable, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
