8-Port GPON Optical Line Terminal with SFP+ Model: UF-OLT
Introduction Thank you for purchasing the Ubiquiti Networks® U®Fiber OLT. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents U Fiber OLT Mounting Brackets (Qty. 2) Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) 8-Port GPON Optical Line Terminal with SFP+ Model: UF-OLT GPON SFP Transceiver (UF-GP-B+) Power Cord Rubber Feet (Qty.
System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Web Browser: Google Chrome (Other browsers may have limited functionality) Installation Requirements • Phillips screwdriver (for rack- or wall-mounting) • Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting) • Compatible PON SFP and SFP+ transceivers with appropriate fiber optic cabling. For information about compatible fiber transceivers, visit: community.ubnt.
Hardware Overview Front Panel Ports GPON Ports (PON1-PON8) SFP+ Ports MGMT Port Console Port Interface Reset Button Description GPON Ports (PON 1-PON 8) Gigabit Passive Optical Network ports support up to 128 clients on each port. SFP+ Ports Hot-swappable SFP+ ports support 1G or 10G connections. MGMT Port 10/100/1000 Ethernet port used for out‑of‑band management. Console Port RJ45 serial console port for Command Line Interface (CLI) management.
Interface Description There are two methods to reset the U Fiber OLT to factory defaults: • Runtime reset (recommended) The U Fiber OLT should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the MGMT LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the U Fiber OLT will automatically reboot.
Front Panel LEDs System PON (1-8) SFP+ (1-2) MGMT LED State Status Blue/Flashing Initializing/Booting Up White Ready for Use Off No Link White/Flashing GPON Link/Activity Off No Link Green/Flashing 1G Link/Activity White/Flashing 10G Link/Activity Off No Link Amber/Flashing 10/100 Link/Activity Green/Flashing 1000 Link/Activity System PON 1-8 SFP+ (1-2) MGMT *640-00269-04* 640-00269-04
Back Panel AC/DC PSU Module Fans PSU 2 Module Bay Side Panels Ventilation Holes Ventilation Holes WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE FANS AND VENTILATION HOLES FOR ADEQUATE AIRFLOW.
Hardware Installation The U Fiber OLT can be placed on a horizontal surface, mounted on a wall, or mounted in a rack. 1. Attach the Mounting Brackets to the U Fiber OLT using the eight Bracket Screws. 2. Attach the U Fiber OLT to the rack using the four Mounting Screws. (If the rack has square slots, then use the Cage Nuts with the Mounting Screws.
3. Connect the Power Cord to the AC/DC PSU Module. 4. Connect the other end of the Power Cord to a power outlet.
Connecting PON 1. Remove the protective plug covering a PON port. 2. Insert the GPON SFP Transceiver into the PON port. 3. Connect a fiber optic cable to the GPON SFP Transceiver. Then connect the other end of the cable to a Passive Optical Splitter (POS). 4. Repeat steps 1-3 to connect additional PON ports. Note: One GPON SFP transceiver (model UF-GP-B+) is included. Use compatible PON SFP transceivers with the appropriate fiber optic cabling at each PON port.
Connecting SFP+ 1. Remove the protective plug covering an SFP+ port. 2. Insert a compatible SFP transceiver into the SFP+ port. D D M M K 0 m 2 n CS 0 1 /M 3 1 S xR s /m pb n M 0 0 5 0 5 0 1 1 xT 3. Connect the fiber optic cable to the SFP transceiver. Then connect the other end of the cable to an SFP device.
Accessing the Configuration Interface 1. Connect an Ethernet cable from your computer to the MGMT port on the U Fiber OLT. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser. Type https://192.168.1.1 in the address field. Press enter (PC) or return (Mac). 4. The login screen will appear. Enter ubnt in the Username and Password fields.
Installing UNMS™ The Ubiquiti Network Management System (UNMS) is a Linux-based controller software used to centrally manage the U Fiber OLT and U Fiber Nano G clients. For the latest UNMS version and installation guide, visit: www.ubnt.
Specifications U Fiber OLT Dimensions Weight Without Mount Brackets With Mount Brackets Max. Power Consumption Power Method Power Supply Supported Voltage Range Button Processor System Memory LEDs System PON Data Ports SFP+ Data Ports RJ45 (MGMT) Port Interfaces Data Ports Serial Console Port Certifications Rackmount Operating Temperature Operating Humidity GPON SFP OLT Transceiver (UF-GP-B+ ) 442.4 x 285.6 x 43.7 mm (17.42 x 11.24 x 1.72") 4.400 kg (9.70 lb) 4.495 kg (9.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: CLASS 1 LASER PRODUCT - Do not look into the ends of the fiber optic cable or SFP modules while converters are powered.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3(A)/NMB-3(A) Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes: 1.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Lietuviškai [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/KE.
www.ubnt.com ©2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, U Fiber, and UNMS are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
