Rackmount Accessory Model: CKG2-RM
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Cloud Key Gen2 Rackmount Accessory. This Quick Start Guide is designed to guide you through installation and also includes warranty terms.
Hardware Overview Front Panel Note: This section provides an overview of the front panel as it would function with a Cloud Key installed in the Docking Bay. Ethernet Port LED Reset Button LED Color State Status White Solid Ready for configuration Flashing Initializing Heartbeat Flashing Firmware upgrade in progress. Device is busy; do not touch or unplug it. Blue Solid Device ready for use Flashing Shutting down Rapid Flashing Device failure; refer to the display for more information.
Back Panel Lock Tab Docking Bay Lock Tab Mechanism that allows you to adjust the size of the Docking Bay depending on which Cloud Key you are using: UCK-G2 or UCK-G2-PLUS. Docking Bay Interface where the Cloud Key connects to the rackmount. Hardware Installation 1. Attach the UniFi Rackmount Accessory to the rack using the four Mounting Screws. (If the rack has square slots, then use Cage Nuts with the Mounting Screws.) 2. Connect an Ethernet cable (not included) to the Ethernet Port. 3.
Connecting the Cloud Key G2 The Cloud Key G2 must be installed with the 13-pin connector facing up. Once docked, the LCD display will appear in the window of the rackmount. 1. Remove the sticker from the 13-pin connector. 2. Insert the Cloud Key G2 into the docking bay once the following three conditions are met: a. The 13-pin connector is face up b. The LCD screen is face forward into the rackmount c.
Connecting the Cloud Key G2 Plus When installing the Cloud Key G2 Plus, the width of the Docking Bay must be adjusted to accommodate the larger dimensions. To adjust the Docking Bay: 1. Press down on the Lock Tab and slide the docking bay cover open until it locks into place. 2. Remove the sticker from the 13-pin connector on the Cloud Key G2 Plus. 3. Insert the Cloud Key G2 Plus into the docking bay once the following three conditions are met: a. The 13-pin connector is face up b.
Specifications CKG2-RM Dimensions Weight Enclosure Management Interface Networking Interface Buttons Power Method 27.10 x 46.80 x 119.75 mm (1.07 x 1.84 x 4.71") 172 g (6.07 oz) Aluminum UniFi (1) 10/100/1000 Ethernet Port (1) Reset to Defaults Power 802.3af PoE DC 5V, 1A Power Supply 802.3af PoE or USB-C 5V, Minimum 1A Max.
Safety Notices 1. 2. 3. Read, follow, and keep these instructions. Heed all warnings. Only use accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label.
In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Battery Warning 1. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight. 2. Do not use any cell or battery which is not designed for use with the equipment. 3. Always purchase the battery recommended by the device manufacturer for the equipment. 4. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Country List AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK BFWA (Broadband Fixed Wireless Access) members noted in blue Note: This device meets Max.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Français La directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че този тип радиосъоръжение CKG2-RM е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa CKG2-RM u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: www.ubnt.
Polski [Polish] UBIQUITI NETWORKS niniejszym oświadcza, że typ urządzenia radiowego CKG2-RM jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: www.ubnt.com/compliance Português [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rádio CKG2-RM está em conformidade com a Diretiva 2014/53/UE.
Online Resources Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA www.ubnt.com ©2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
