User Manual
Back Panel
Lock Tab
Docking
Bay
Lock Tab Mechanism that allows you to adjust the size
of the Docking Bay depending on which Cloud Key you
are using: UCK-G2 or UCK-G2-PLUS.
Docking Bay Interface where the Cloud Key connects
to the rackmount.
Hardware Installation
1. Attach the UniFi Rackmount Accessory to the
rack using the four Mounting Screws. (If the rack
has square slots, then use Cage Nuts with the
Mounting Screws.)
2. Connect an Ethernet cable (not included) to the
Ethernet Port.
3. Connect the other end of the Ethernet cable
to a port on a compatible PoE switch, such as a
UniFiPoE Switch.