Users Manual

Installation Requirements

• Pole-mounting: 7 mm socket wrench or screwdriver

• Wall-mounting: wall fastener (not included)

• Shielded Category 5 (or above) cabling with drain wire

should be used for all wired Ethernet connections and

should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti.

For more details, visit ui.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH-SP-G2, one near the device and the other at

the entry point to the building. The ETH-SP-G2 will absorb

power surges and safely discharge them into the ground.

LAN

ETH-SP-G2

ES-8-150W

GBE