User Manual

Installation Requirements

• Phillips screwdriver for wall-mounting

• Shielded Category 5 (or above) cabling with drain wire

should be used for all outdoor wired Ethernet connections

and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit www.ubnt.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH-SP, one near the NanoStation and the other

at the entry point to the building. The ETH-SP will absorb

power surges and safely discharge them into the ground.

To LAN

ETH-SP

ES-8-150W

NS-5AC

Diagram Showing Use of Ethernet Surge Protectors