Quick Start Guide

Accessing airOS via Wi‑Fi
Verify connectivity in the airOS Configuration Interface. There
are two methods, the UNMS
™
app and Web Portal. Both are
available for 15 minutes immediately after you power on the
PowerBeam. If necessary, you can power cycle the PowerBeam
to re‑enable its Wi‑Fi.
Proceed to the appropriate instructions:
UNMS App
1. Download the UNMS app from the AppStore (iOS) or
Google Play
™
(Android).
2. Connect your device’s Wi‑Fi to the PowerBeam SSID
named: PBE-5AC-Gen2:<MAC Address>
Note: Ensure that DHCP is enabled on your
Wi‑Fiadapter.
3. Launch the app.
4. Tap the PowerBeam on the Connections screen.