Quick Start Guide

Installation Requirements

• 13 mm wrench

• Shielded Category 5 (or above) cabling with drain wire

should be used for all wired Ethernet connections and

should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial‑grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit www.ubnt.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH‑SP, one near the PowerBeam and the other at the

entry point to the building. The ETH‑SP will absorb power

surges and safely discharge them into the ground.

To LAN

ETH-SP

ES-8-150W

PBE-5AC-Gen2