Manualshelf

Quick Start Guide

ManualsBrandsUbiquiti ManualsWireless TransmissionPowerBeam AC Gen2 5 GHz High Performance airMAX ac Bridge
12345678910
Installation
1. Align and insert the tabs of the Adjustment Bracket into the
slots of the Dish Reflector. Rotate the Adjustment Bracket
counterclockwise until the alignment holes in the dish and
bracket align with each other.
2. Remove the Antenna Feed from the Rear Housing:
a. Push in the sides of the Cable Door and detach it from
the Rear Housing. Keep the Cable Door detached.
b. Press the Release Button and slide the Rear Housing off
of the Antenna Feed.