Spec Sheet

DATASHEET
2
Overview
Ubiquiti Networks launches the
latest generation of airMAX® CPE
(Customer Premises Equipment),
the PowerBeam® 5AC Gen 2, with
dedicated Wi-Fi management.
Improved Noise Immunity
The PowerBeam 5AC Gen 2 directs
RF energy in a tighter beamwidth.
With the focus in one direction, the
PowerBeam 5AC Gen 2 blocks or
spatially lters out noise, so noise
immunity is improved. This feature
is especially important in an area
crowded with other RF signals of the
same or similar frequency.
Integrated Design
Ubiquiti’s InnerFeed® technology
integrates the radio into the feedhorn
of an antenna, so there is no need for
a cable. This improves performance
because it eliminates cable losses.
Featuring high performance
and innovative design, the
PowerBeam 5AC Gen 2 is versatile
and cost-effective to deploy.
Software
airOS® 8 is the revolutionary operating
system for Ubiquiti® airMAX ac
products.
Powerful Wireless Features
• Access Point PtMP airMAX
Mixed Mode
• airMAX ac Protocol Support
• Long-Range PtP Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control:
Automatic/Manual
• Automatic Distance Selection
(ACK Timing)
• Strongest WPA2 Security
Usability Enhancements
• airMagic® Channel Selection Tool
• Redesigned User Interface
• Dynamic Conguration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Comprehensive Array of Diagnostic
Tools, including RF Diagnostics and
airView® Spectrum Analyzer
Application Examples
PtMP Client Links
The PowerBeam 5AC Gen 2 used as a CPE device for each client in an
airMAX Point-to-MultiPoint (PtMP) network.
PtP Link
Use a PowerBeam 5AC Gen 2 on each side of a Point-to-Point (PtP) link.