Installation Instructions

Ports
3
2
Ethernet The Ethernet port is a Gigabit Ethernet port used to
connect the power and should be connected to the LAN and
DHCPserver.
Reset The Reset button serves two functions for the UniFi AP:
• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the
Reset button for more than five seconds.
Hardware Installation
Wall Mount
1. If the Ethernet cable is coming from the inside of a wall:
a. Drill or cut a hole in the wall and feed the Ethernet
cable through the opening.
b. Pull the Ethernet cable forward and slide it through the
opening in the mount.
2. Use the Screws and Screw Anchors to secure the Base Mount
to the wall.