Advanced Manual

68
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 9: Insights
Known Clients
Show Filter the results on the page based on the date the
client was last seen. Select last 24hours, 3days, 7days,
2weeks, 30 days, 120 days, or All.
You can apply one of the following filters:
• All Display all clients, regardless of connection type.
• Wireless Display all wireless clients.
• Wired Display all wired clients.
You can also apply one of the following filters:
• All Display all users and guests.
• User Only display users.
• Guest Only display guests.
An additional filter is available:
• Blocked Only display blocked clients.
• Noted Only display clients whose configurations
include notes. (See “Wireless Client – Configuration”
on page 111 or “Wired Client – Configuration” on
page 112 for more information.)
• Static IP Only display clients using static IP addresses.
Name Displays the hostname, alias, or MAC address of the
connected client. You can click the name to get additional
details; see “Client Details” on page 109 for more
information.
Manufacturer Displays the name of the device
manufacturer.
User/Guest Indicates whether the client is/was
connected to a primary or guest network.
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
theclient.
Last Seen Displays the last date and time the client was
connected.
Actions Click a button to perform the desired action:
• Block Click
BLOCK
to block this client from accessing
the network. Click
UNBLOCK
to unblock this client.
• Reconnect Click
RECONNECT
to reconnect a wireless
client. You can click
RECONNECT
to kick out a client,
which usually reconnects back quickly; this is useful for
troubleshooting or resolving a problematic wireless
connection.
• Unauthorize/Authorize (Available for Guests only.)
Click
UNAUTHORIZE
to remove authorization of guest access
and disconnect the guest, or click
AUTHORIZE
for guests
pending authorization.
Neighboring Access Points
Show Filter the results on the page based on the time
the AP was last seen. Select last 24hours, 3days, 7days,
2weeks, 30 days, 120 days, or All.
You can apply one of the following filters:
• All Displays all wireless APs.
• 2G Only displays 2.4 GHz APs.