Information Sheet

16
Chapter 4: Live View UniFi Video User Guide
Ubiquiti Networks, Inc.
5. To view or modify the details of any camera in your
layout, click the Configure icon and refer to “Camera
Details Window” on page 8.
6. Save the layout by entering a name or brief description
in the View Name text field and clicking Save on the
right side of the menu bar. Or, click Delete to delete the
view without saving it.
Edit a View
To edit an existing Live View, follow these steps:
1. Display the view that you want to edit by selecting it
from the drop‑down list. Then click Edit View.
2. Edit the view using the icons displayed in the video
feeds of the layout:
‑ Camera Select Click this icon to assign a different
camera to the video feed.
‑ Configure Click this icon to display the camera
details window (described in detail in “Camera
Details Window” on page 8).
‑ Camera Settings Click this icon to configure
various image settings such as Brightness, Contrast,
Hue, Saturation, Denoise, Sharpness, WDR, AE Mode,
Orientation, and Infrared.
‑ Snapshot Click this icon to download a snapshot
of the current view.
‑ Camera Resolution Click this icon to set the
camera’s resolution to one of the following settings:
Auto (Medium), High, Medium, Low.
‑ Microphone Volume Click this icon to configure
the camera’s microphone. Drag the slider to the left or
right to adjust the volume for recording audio input,
or click Disable Mic to disable the microphone.
Note: If the microphone is disabled, the volume
icon will not appear in the toolbar. To re‑enable
the microphone, you will have to manually reset
the camera to factory defaults by pressing its
reset button.
‑ Audio Click this icon to mute or unmute the audio.
3. Save the edited layout by clicking Save on the right
side of the menu bar. Click Revert to cancel the
changes you’ve made to the view.
Renaming a View
You can rename an existing view or layout by performing
the following steps:
1. Click the drop‑down list of existing camera layouts and
select the view you want to rename. In this example,
we will use Front Office.
2. Click Edit View next to the camera layout you selected
and enter a new name for the layout.
3. Click Save to save the changes you’ve made to the
view. Click Revert to cancel the changes you’ve made
to the view.
Deleting a View
You can delete an existing view or layout by performing
the following steps:
1. Click the drop‑down list of existing camera layouts and
select the view you want to delete.
2. Click the Delete button to remove a view.
3. When prompted, click Delete to confirm.