Information Sheet

3
Chapter 1: InstallationUniFi Video User Guide
Ubiquiti Networks, Inc.
5. The setup wizard will search for the NVR on your
network.
6. If your NVR cannot be found, the wizard displays
“Unable to Locate NVR”. Verify that the NVR is
connected to your network and click Rescan to try
again.
7. The NVR Discovered window will appear, listing any
NVRs that were discovered. Select your NVR and click
Continue.
8. The Setup NVR window will appear:
a. Enter a name for the NVR.
b. Specify your time zone.
c. Select I agree to the Terms of Service (click Terms
of Service to view the Terms of Service).
d. Click Next.
9. Create the local admin account by entering a Name,
Username, and Password (enter twice to confirm). This
information will be used to log in and access the UniFi
Video Controller system. Click Next.
10. The Setup Cameras window will appear, displaying a
randomly generated password (you can change this
password later in the Settings section). Click Continue.
11. When the firmware update is complete, “Setup
Complete” will be displayed. Click Go to Cameras:.