User's Manual

1
Ubisense –Wideband Location System – Modular Tag V3.1
Introduction
The Modular Tag V3.1 (model number UBIMOD31) is a wireless module intended to be
integrated into other devices for the real-time location of objects. It transmits wideband pulses
which are picked up by a network of basestations (Ubisensors), allowing the 3D position of the
tag to be found. The use of wideband technology enables greater positioning accuracy within
buildings than other wireless technologies, because it is much less susceptible to multipath
interference effects. Applications of the system include healthcare, workplace productivity,
security, retail management and manufacturing.
This document describes the features and specifications of the Modular Tag V3.1 and important
regulatory information concerning its use and integration into other devices.
Regulatory Information for the United States of America
The Modular Tag V3.1 is approved under Parts 15.249 and 15.250 of the FCC rules as a Modular
Transmitter. It is the responsibility of the Host product manufacturer to ensure continued
compliance of the module once integrated in to their product.
The product into which the Modular Tag V3.1 is incorporated must bear a label per the FCC
requirements which shows the FCC ID assigned to the Modular Tag V3.1 as follows.
Contains FCC ID: SEAMOD31
The following information must be conveyed in the information supplied to the End User of the
product into which the Modular Tag V3.1 is incorporated:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The user’s manual or instruction manual shall caution the user that changes or modifications to
the equipment not expressly approved by the party responsible for the grant of equipment
authorization issued by the FCC could void the user’s authority to operate the equipment under
the grant of equipment authorization, for example:
CAUTION: Any changes or modifications made to the Modular Tag V3.1 which are not
expressly approved by Ubisense Limited could void the user's authority to operate the
equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement: This device complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment. The device has been
evaluated as safe to use at any separation from the person.
IMPORTANT NOTE: FCC Radiation Exposure Statement: Host configurations involving co-
location of this module with other transmitters that operate simultaneously are required to be
evaluated using the FCC multi-transmitter procedures.