Safety Instructions & Warnings Important Safety Instructions Road those Instructions. Kae these Instructions. Heed nll Wakings. Follow all retractions. * Do not use his epigrams near water. + Clean clay with a dry cloth. * Do not block any ventilation openings. Install in accordance: ‘with the manufacturer's instructions. = Do not install roan any goat sources such as mediators, best ers noon thee apparatus (sung anteaters) pps of the polarized ot grounding type plug.
* CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. » Mons plug ia used as disconnect device md it should remain adjusts or, Stress softer than those specified may result in hazardous radiation exposure. * WARNING: Changes oe modifications 1 this mit mot ‘expressly approved by the party responsible for compliance ‘could void tho user's Heredity bo operate the encampment.
Table of Contents Overview Features 5 Includes 5 Overview Front Rear-7 Functions 8 Batteries 8 Setup Power -9 Connecting Cable/TV Antenna to the Tuner 9 HDMI 10 Audio/Video Input & Output 11 External Audio 12 USB Storage Devices 12 Using the Tuner 1. Initial Setup 13 2. Channel Search 13 3. Channels Saved 14 4. Recording TV 5.
Remote Functions POWER Press to power ON, Press and hold to power OFF, 200M Press to zoom display image in rout TRADING Select TV of Radio source. MUTE Press to tum mute on or off. INFO Display channel Information. TIMER Set recording schedule for specific times and channels, «© Tun closed captioning on or off. FAV Press to view saved channels list. Go To Press, then use the number keypad to enter spice rack numbers or time stamp during playback. Press OK when ready.
Setup Power Plug the AC/DC power adapter (included) Into a standard wall outlet and Into the DC power input on the rear of the unit. After connecting the power, please allow approximately 5 seconds to pass before powering the unit oN. TIN ANTHOLOGY 0 OPS Connecting Cable/TV Antenna to the Tuner To watch television through the tuner, it must be connected 10 a cable TV or TV antenna cable (not included). 1. Connect the cable TV or TV antenna cable to the input on the tuner.
Connecting to Other Devices HDMI HOM) offers superior sound and picture quality, and (s the easiest way to send media farm the tuner to your TV or other display with an HDMI input. Requires an HDMI cable (not Included) and a TV or display with an HDMI Input. 1. Using an HDMI cable, connect the HDMI output on the tuner to the HDMI input on your TV, 2. Set the TV's Source to the connected HDMI Input and use the tuner remote to select and play media.
Audio/Video Input & Output Requires an RCA audio/video {yellow/red/white} cable (Included), ar a component video cable {green/blue/ red} and a RCA stereo (red/white) cable {not included). 1. Using an RCA audio/video cable, connect the audio/video output on the tuner to the audio/video Input on your TV, 2. Set the TV's Source to the connected AV Input and use the tuner remote to select and play media.
Connecting to Other Devices External Audio Requires an RCA stereo audio cable (included RCA AV cable can = — bemused. CS0 0 Note: Speakers must have their own power supply. 1. Using a 3.5mm to RCA stereo cable (indeed, connect the 1 textual powered speakers tithe audio output on the tuner, Note: The yellow video plug is not used in ths setup and will not need to be connected. 2. The tuner will send audio signal to the speakers.
Using the Tuner Es eo Logan oe en 1. Initial Setup 1. After connecting the tuner to your TV, power on the TV and the tuner. The tuner will then display the above options to configure the device. 2. Use the Amok buttons to select your preferred language and country. 3. When finished, proceed to the Channel Search. 2. Channel Search 1. The tuner will scan for available TV channels and automatically save them to memory, This process may take several minutes.
Using the Tuner 3. Channels Saved 1. When finished, the tuner will display all saved channels available to view. 2. Use the Arrow/OK buttons to select a channel, You can also use the Channel buttons to switch to different channels, or press the List button on the cremate to access the channels list at any time, 4. Recording TV Note: To record TV, you must have a USB drive connected to the tuner. USB drive not included. 1.
5. Playing Recorded TV Note: The following steps also work for playing Music, Photos, and Movies via USB. 1. Press the USB button on the remote. 2. Use the Arrow/OK buttons to select PVR. 3. Use the Awoke buttons to find and play the recorded selection. While playing, press the HOLD {yellow} button on the remote to enter full screen mode. Use the controls on the remote to play, pause, and skip media.
PVR (TV Recording) Recording > Prows tha remote's "REC" key to enter the recording status, and press the "Stop" key when you finished hs recording, so the whole record function 3 Bi. Wie dm go Figure 30 Figure 31 2. Programmed Tums Recording Option 1: Simply press "TIMER" key on the ram ate ta go to Programmed Time Record menu.
BE Channel Search Step checkmate cable connections Make sure all the cables are connected correctly as Connection Diagram Step 2: Channel Search Power on, then the TV screen shows the Starting Logo, and there are 3 options: “Select Language”, “Select Country”, “Search Channel” After you select language and country that you want, and select*Search Channel” to start channel search.
Appendix Troubleshooting If you has difficulty with your digital TV set-top receiver, there ans several possibilities you shooed Investigate forbears calling for a service technician Probe! possible Causes Wha 0 The display on the front Check that the power cord Is panel doss not light up | Power cord is not connected plugged into power socket Press POWER key on the front No sound and no picture | The receiver is under standby | panel to switch to operation made The antenna ls disconnected | Check antenna c