Specifications

Date:26-JULY-2020
Page: 36
Terminology, all events and operations details including action key event, LED and Buzzer status.
17.1 Z-Wave Terminology
Z-Wave Functionality Documentation Terminology Description
Inclusion Add The process of adding a node to Z-Wave Network
Exclusion Remove The process of removing a node from Z-Wave Network
17.2 Event Status
Event Action LED Buzzer
Sound
Remark
Event Okay n/a Green flash x2 2 times Event executed without problem / will go to next step
Fail n/a Red flash x3 3 times Even failed and will stop to execute next step
Timeout n/a Red flash x2 2 times Even timeout and will stop to execute next step
17.3 System Event
Event Action LED Buzzer
Sound
Remark
Power On Okay Power Up YàG x1 1 time System Power On Okay after battery installed
Device
Mode
Shipping Triggering
Built-in Sensor
Probe
Yel lo w x1 @ Sec n/a Device is in Shipping Mode, all functions are disabled
Normal Red x1 @ Sec 1 time @ second Device is in Normal Mode, all functions are enabled
Waked up Standalone After triggered by
3-axis sensor
Yellow ON x1 1 time Waked up and 3-axis sensor is ready. In Standalone mode.
Network Green ON x1 1 time Waked up and 3-axis sensor is ready. In Mesh Network
Mode
17.4 3-Axis Accelerometer Processing
Event Action LED Buzzer
Sound
Remark
Position Recognizing n/a Green flashing n/a Position is under recognizing; timeout is 5 seconds
Gesture Recognizing n/a G & R flashing n/a Gesture is under recognizing; timeout is 10 seconds