User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 60
6.4.2 Transmission
The Tra
nsmission page allows the user to select the network type (MFN or SFN), set the
modulation parameters and configure a number of SFN parameters.
The Transmission page will change dynamically, depending on the Modulator Mode selected
(MFN, SFN or SFN with Config From Stream On). The user has the option to configure the
modulation parameters from the incoming stream (MIP) or locally.
In SFN mode, a network of modulator operating at the same frequency are all synchronized
using special timing packets (MIP) embedded in the input transport stream as well as GPS
timing information. If the SFN mode is disabled, the system will operate in MFN mode
where all modulators in a network work independently of one another.
Figure 6-11 Transmission Configuration (MFN)