User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD Initial On Site
ATSC Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 1 37
strength ranges from 0 to 100% and typically should be above 40% for
reliable operation. The signal strength allows the user to optimize the
position of the receive antenna.
Table 10.2.2: Demodulator Details Screen (RD)
This menu indicates whether there is a signal present at the demodulator.
Table 10.2.3: Demodulator Phase Lock Loop Details Screen (RD)
This menu indicates whether the Phase Lock Loop is locked in the
demodulator.
Table 10.2.4: Receive Input Channel Details Screen (RD)
This menu indicates the input channel to the Demodulator circuit.
Pushing the Left Arrow will display the System Device Details 8VSB
Demodulator Values Main Sub Screen and then pushing the Down arrow will
access the System Device Details 8VSB Modulator Main Sub Screens.
Table 10.3: Transmitter/Translator 8VSB Modulator Details Screen (TD/RD)
This is the System Device Details 8VSB Modulator Main Sub Screen, not present with
Axciter. Push the ENTER button to access the Device 8VSB Modulator submenus or
push the DOWN Arrow to view the next main menu, which is the Device Details IF
Processor Main Sub Menu.
Table 10.3.1: Transmitter/Translator S310 Input Details Screen (TD/RD)
This menu indicates if the modulator has locked to the SMPTE-310 signal
coming from the demodulator.
Table 10.3.2: Modulator Phase Lock Loop A Details Screen (TD/RD)
This menu indicates if the Phase Lock Loop A in the modulator is locked.
Table 10.3.3: Modulator Phase Lock Loop B Details Screen (TD/RD)
This menu indicates if the Phase Lock Loop B in the modulator is locked.
Table 10.3.4: Modulator Linear Equalization Details Screen (TD/RD)
This menu indicates if the Linear Equalization is being used.