User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD Initial On Site
ATSC Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 1 40
Table 10.7: External Amplifier Device Details Screen (TD/RD)
This is the Transmitter Device Details External Amplifier Main Sub Screen. This is
the final Device Details Main Sub Menu. Push the ENTER button to access the Device
External Amplifier #1. Push the LEFT Arrow to go back the Main Device Details
Screen. Then push the DOWN Arrow to access the Transmitter Set Up Main Menu.
NOTE: Shown below are the External Amplifier #1 Details Screens. The
External Amplifier #2, #3 or #4 Details Screens are presented in the same
order if they are present in the system.
Table 10.7.1: External Amplifier #1 Forward Power Details Screen (TD/RD)
Indicates Output Power for external amplifier #1. NOTE: See the final test
data sheet for the typical value.
Table 10.7.2: External Amplifier #1 Reflected Power Details Screen (TD/RD)
Indicates Reflected Power for external amplifier #1. NOTE: See the final test
data sheet for the typical value.
Table 10.7.3: External Amplifier #1 I1-A1 Current Details Screen (TD/RD)
Indicates Current of the A1 device in the external amplifier #1. NOTE: See
the final test data sheet for the typical current value.
Table 10.7.4: External Amplifier#1 I2-A2 Current Details Screen (TD/RD)
Indicates Current of the A2 device in the external amplifier #1. NOTE: See
the final test data sheet for the typical current value.
Table 10.7.5: External Amplifier#1 I3-B1 Current Details Screen (TD/RD)
Indicates Current of the B1 device in the external amplifier #1. NOTE: See
the final test data sheet for the typical current value.
Table 10.7.6: External Amplifier#1 I4-B2 Current Details Screen (TD/RD)
Indicates Current of the B2 device in the external amplifier #1. NOTE: See
the final test data sheet for the typical current value.