User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Initial On Site
Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 0 28
Table 10.3: Transmitter/Translator 8VSB Modulator Details Screen
(BTD/BRD)
This is the System Device Details 8VSB Modulator Main Sub Screen. Push the ENTER
button to access the Device 8VSB Modulator submenus or push the DOWN Arrow to
view the next main menu, which is the Device Details IF Processor Main Sub Menu.
Table 10.3.1: Transmitter/Translator MPEG Input Details Screen (BTD/BRD)
This menu indicates if the modulator has locked to the SMPTE-310 signal
coming from the demodulator.
Table 10.3.2: Modulator Phase Lock Loop A Details Screen (BTD/BRD)
This menu indicates if the Phase Lock Loop A in the modulator is locked.
Table 10.3.3: Modulator Phase Lock Loop B Details Screen (BTD/BRD)
This menu indicates if the Phase Lock Loop B in the modulator is locked.
Table 10.3.4: Modulator Linear Equalization Details Screen (BTD/BRD)
This menu indicates if the Linear Equalization is being used.
Table 10.3.5: Modulator Non Linear Equalization Details Screen (BTD/BRD)
This menu indicates if the Non Linear Equalization is being used.
Pushing the Left Arrow will display the System Device Details 8VSB Modulator
Values Main Sub Screen and then pushing the Down arrow will access the
System Device Details IF Processor Main Sub Screen.
Table 10.4: Transmitter/Translator IF Processor Details Screen (BTD/BRD)
This is the System Device Details IF Processor Main Sub Screen. Push the ENTER
button to access the Device IF Processor submenus or push the DOWN Arrow to view
the next main menu, which is the Device Details Upconverter Main Sub Menu.
Table 10.4.1: IF Processor Input Details Screen (BTD/BRD)
This menu indicates if there is an input signal to the IF Processor.