User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Initial On Site
Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 0 29
Table 10.4.2: IF Processor Modulation Present Details Screen (BTD/BRD)
This menu indicates if there is Modulation on the signal to the IF Processor.
Pushing the Left Arrow will display the System Device Details IF Processor
Values Main Sub Screen and then pushing the Down arrow will access the
System Device Details Upconverter Main Sub Screen.
Table 10.5: Upconverter Device Details Screen (BTD/BRD)
This is the System Device Details Upconverter Main Sub Screen. Push the ENTER
button to access the Device Upconverter submenus or push the DOWN Arrow to view
the next main menu, which is the Device Details Downconverter Main Sub Menu.
Table 10.5.1: Upconverter Phase Lock Loop 1 Details Screen (BTD/BRD)
This menu indicates if the Phase Lock Loop 1 in the upconverter is locked.
Table 10.5.2: Upconverter Phase Lock Loop 2 Details Screen (BTD/BRD)
This menu indicates if the Phase Lock Loop 2 in the upconverter is locked.
Table 10.5.3: Upconverter 10 MHz Phase Lock Loop Details Screen (BTD/BRD)
This menu indicates if the 10 MHz Phase Lock Loop in the upconverter is locked.
Table 10.5.4: Upconverter 10 MHz Details Screen (BTD/BRD)
This menu indicates if the 10 MHz reference used is generated internally or
provided by an external reference source.
Table 10.5.5: Upconverter System Channel Details Screen (BTD/BRD)
The upconverter transmit channel screen indicates the channel and frequency
that the upconverter is currently set.
Pushing the Left Arrow will display the System Device Details Upconverter
Values Main Sub Screen and then pushing the Down arrow will access the
System Device Details Downconverter Main Sub Screen.