User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Web Ethernet
Regenerative Translator Interface Description
Instruction Manual, Rev. 0 39
Figure 8: Typical Ethernet Main Control/Monitoring Screen
After logging in, the main control/monitoring screen is displayed, allowing operate and
standby control and read back of the system parameters. Refer to Figure 8 for a typical
main control/monitoring screen.
Green = okay/normal operation
Yellow = warning, no fault
Red = current fault
Orange = latched fault
To change the web interface settings, click the ‘configure’ button near the top of the
screen while you are logged as an administrator. When entering a site ID be sure to not
use any spaces or special characters except underscores, dashes, and forward slashes.
If the item on screen is Orange, which indicates latched fault, the fault can be reset by
pushing the Fault Reset button located top middle of screen.
To manage user accounts, click the ‘Account Management’ button near the top of the
configure screen