User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Web Ethernet
Regenerative Translator Interface Description
Instruction Manual, Rev. 0 40
Figure 9: Typical Account Management Screen
The Innovator CXB supports up to 5 different users. To add or change one of the
accounts click the Add/Change button in the row of the account you want to modify,
then enter the desired name, password, and administrator rights for the user and click
save.
Figure 10: Typical Account Management Screen when Add/Change selected
When you have completed using the web interface, please remember to log out via the
'logout' button at the top of the screen.
NOTES: The Reset Ethernet User ID Screen, in the Set Up Menus on the LCD Display,
allows the user the option of resetting the User name and Password for the
Ethernet. The Yes or No selection can be changed by pushing the Up or Down
Button. After the selection has been made, the user needs to depress the right
or left arrow and then the display will ask “PUSH ENTER TO ACCEPT CHANGES”.
If the ENTER button is depressed, the change will be accepted. If any other
button is depressed, the change will not be made. If Yes is selected on the
screen, and accepted, the User name and Password will reset to the factory
default.