User's Manual

Digital ATSC Exciter-Modulator System Chapter 2,
Installation and Operating Instructions
Axcera Axciter, Rev. 0 13
Screens for DTVision Linear
Access the DTVision Linear screens by pressing the second soft button on the
Main Status screen. DTVision Linear screens are listed in Table 2-5.
Table 2-5. ATSC Screens
SCREEN DESCRIPTION
DTVision Linear
Home
(Spectrum)
See page 22 for more information.
DTVision Const See page 24 for more information.
DTVision Eye See page 25 for more information.
DTVision Linear
Equalizer
See page 26 for more information.
DTVision Linear
Quad
See page 27 for more information.
Screens for DTVision Non-Linear
Access the DTVision Linear screens by pressing the second soft button on the
Main Status screen. DTVision Linear screens are listed in Table 2-5.
Table 2-5. ATSC Screens
SCREEN DESCRIPTION
DTVision Non-
Linear Home
(Spectrum)
See page 29 for more information.
DTVision Peak
Avg
See page 30 for more information.
DTVision Phase
Amp
See page 31 for more information.
DTVision Non-
Linear Equalizer
See page 32 for more information.
DTVision Non-
Linear Quad
See page 33 for more information.
User Interface Conventions
Screens consist of fields, graphs, values and buttons. Fields provide either
status information and values or allow the user to change the values. The
graphs provide a visual display of the system status and allow analysis. The
colored value fields provide status information at a glance.
Soft buttons on the right side of the screen allow navigation. Each soft button
corresponds to a menu item on the screen. The Home button will take the
user back to the Main Status Screen. The Back button will take the user back
to the last screen they were on.
To change values, users must use the keypad to the right of the soft buttons.