User’s Manual Manuel de l’utilisateur Manual del usuario
A n tec Tru eP o w er U s er' s M an u al Antec TruePower ATX12V power supply Models: TRUE330, TRUE380, TRUE430, TRUE480, TRUE550 Table of Contents Table des matières - Indice English ................................................................. 1 Français ................................................................ 8 Español .................................................................
[Applicable only to models designed for sale in the European Union: TruePower models designed for the EU include Power Factor Correction (PFC) circuitry in accord with European standard regulation code EN61000-3-2. By altering the input current wave shape, PFC improves the power factor of the power supply and results in increased energy efficiency, reduced heat loss, prolonged life for power distribution and consumption equipment, and improved output voltage stability.
2) Peak surge current: 15 sec max. Measurements shall be made with an oscilloscope with 20MHz bandwidth. 10uF elec trolytic capacitor parallel 0.1uF ceramic capacitor to simulate system loading to measure it. Figure 1. AC-V 3) At peak load +12V output regulation +/-10%. 2.1 HOLD-UP TIME: 20ms (minimum) Test Condition: Full load. AC input 115V or 230V, 60Hz or 50Hz 2.2 LOAD TRANSIENT RESPONSE (STEP LOAD) Step load changes up to 20% of full load, while other loads remains constant within the rating.
AUXILIARY POWER CONNECTOR (PS1) 6.0 CE REQUIREMENTS: 6.1 EMI 1. MEET FCC CLASS B 2. MEET EN55022 CLASS B HOUSING: WST P/N P20-I42002 or equivalent TERMINAL: WST P/N I42002BS-2 or equivalent Pin 1 2 3 4 5 6 6.2 ESD MEET IEC-801-2/8KV 6.3 EFT/BURST MEET IEC-801-4/2KV 6.4 SAFETY REQUIREMENTS 1. MEET UL 1950 2. MEET IEC 60950 HOUSING: MOLEX 39-01-2040 or equivalent. TERMINAL: MOLEX 39-29-9042 or equivalent. Pin 1 2 3 4 8.