User's Manual

Digital UHF Transmitter Appendix B, Typical Operational Readings
DT835A, Rev. 1 B-2
(A2 and A3) Amplifier Array Assemblies
Two amplifier arrays, each with four, five or six UHF amplifier trays
(A2) Side A
(A2-A1) (A2-A2)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V
(A2-A3) (A2-A4)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V
(A2-A5) (A2-A6)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V