User's Manual

Digital UHF Transmitter Appendix B, Typical Operational Readings
DT835A, Rev. 1 B-3
(A3) Side B
(A3-A1) (A3-A2)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V
(A3-A3) (A3-A4)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V
(A3-A5) (A3-A6)
AGC Voltage = 1 V - 2 V AGC Voltage = 1 V - 2 V
% Reflected = <5% with all trays operating % Reflected = <5% with all trays operating
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
% Output Forward = The level is as needed
to attain the desired output power from the
transmitter
Power Supply = 26.5 V Power Supply = 26.5 V