User manual

快速使用指南
Quick Start Guide
为了更好的保护机器人，在任何情况下移动或使用机器人，请务必手持机器人的后部背包处！！！
当机器人运行时，请勿掰动关节，以防夹伤或损坏机器人。
To better protect Alpha, hold him by his backpack when he is moved or used!
Do not turn Alpha’s joints when he is in operation to avoid being pinched or causing damage to him.
正确使用示例:
错误使用警示: 请勿用力掰动机器人头部、请勿用力掰动机器人关节、请勿用力掰动机器人关节、充电时请勿使用
机器人、请勿将机器人置于边沿处、请勿将机器人置于倾斜面
Example of Correct Use:
Warning of Incorrect Use: Do not turn Alpha’s head and joints with force, and do not use Alpha when he is charging. In
addition, do not place Alpha on the edge of surfaces or on an inclined plane.
01 欢迎认识您的新朋友 Alpha1 Pro
本手册介绍了 Alpha1 Pro 的基本内容，让您快速了解和熟悉机器人，并指导您快速安装和运行应用程序。
01 Meet Your New Friend Alpha 1 Pro
This guide provides basic information about Alpha l Pro to provide you with a quick overview and introduction. It will also
guide you in quickly assembling and using the app.
02 机器人伺服舵机分布
Alpha1 Pro 全身有 16 个伺服舵机，伺服舵机相当于人的关节，让机器人高精度转动，轻松应对各种高难度动作，
实现人形仿真模拟
02 Layout of Servos in Alpha
In Alpha 1 Pro, there are 16 servos in total, which is equivalent to the number of of joints in humans. This allows Alpha to
move in a highly precise way, cope with various dazzling stunts, and realize humanoid simulation.
03 开/关机
开机：长按“ON/OFF”按键 3 秒钟左右，机器人眼部 LED 灯显示蓝色，开机成功。
注意：机器人开机后关节已开始工作，不可用力掰动，否则会造成关节损坏。
关机：长按“ON/OFF”按键 3 秒钟左右，机器人眼部 LED 灯熄灭，关机成功。
03 Power On/Off
Power on: Press and hold “ON/OFF” for about 3 seconds. If the LED light in Alpha’s eyes is blue, then he has successfully
booted.
Attention: After booting, do not force Alpha to move, as this will cause damage to joints already in operation.
Power off: Press and hold “ON/OFF” for about 3 seconds. If the LED light in Alpha’s eyes goes out, then he has
successfully shut down.
04 让我们开始吧
开机后机器人处于复位状态，呈双脚并拢、双臂伸直的姿态（如右图）。
复位时动作幅度较大，请拿住机器人后背包，防止跌倒。