User's Manual
Table Of Contents
- USER MANUAL
- CONTENTS
- Preface
- Disclaimer
- Part I Product Overview
- Part II Safety
- Part III Device Operations
- Part IV Functions of Tablet PC Software
- Part V Transporta and Storage
- Part VI Application Scenarios
- Part VII FAQs/Troubleshooti
- Part VIII Declaration of Conformity
User Manual for ADIBOT-A
15 / 50 Shenzhen UBTECH Robotics Corp Ltd.
◆ Please make sure that ADIBOT-A is used indoors only.
◆ Please do not allow ADIBOT-A to be used on sloping areas.
◆ Please ask assistance to help pass when the ground bulge is higher than 5mm, the free push of
Adibot-A is easily blocked.
◆ Please dispose any broken lamp according to the local laws and regulations based on mercury
which is in the lamps.
◆ If ADIBOT-A failed to operate normally, especially when you detect unusual sound, smell, or
smoke. Please take protection measures, and immediately press the emergency button, turn
off the power supply of the robot, unplug the power cord, and contact the ADIBOT-A
technical support for help.
◆ Please be sure to stick a geomagnetic stripe near the area where the robot may falling.
Battery Safety Alerts:
◆ Risk of explosion if the battery is replaced by an incorrect type.
◆ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, t
hat can result in an explosion.
◆ Leaving a battery in an extremely high temperature surrounding environment that can result i
n an explosion or the leakage of flammable liquid or gas.
◆ A battery subjected to extremely low air pressure that may result in an explosion or a leakage
of flammable liquid or gas.
2.3 Warning Sign